#Teraterm pro web examples pro
TeraTerm Pro Web is the next generation tool for connecting with remote Telnet and SSH hosts. 01 of 25 Start the terminal software on the PC and set up the configuration according to Table 4-1. Now transfer any file to mcu using Xmodem protocol from PC. For example Teraterm can log the session. In HyperTerminal all that i have to do is configure settings and select file for transfer to mcu.
PC side i prefer to use HyperTerminal io console as it is compatible with Xmodem.
#Teraterm pro web examples serial
Serial Tools is built as a Universal Binary application and works natively with both the PowerPC and the Intel based Macintosh running Tiger (Mac OS X 10.4) or newer.
Or may consider using open source also ( if available ) It includes a Terminal Emulator, a Protocol Analyzer, an NMEA parser and a serial port monitor to watch for connections and removals of serial ports. You may implement Xmodem mcu side by reading protocol. XMODEM is a simple file transfer protocol. If you consider some other protocol you may stop reading answer here. While you can select any of the available protocols or write your own protocol and implement it.įor purpose of discussion i select Xmodem protocol. Once you are sure that serial communication is working fine then select some file transfer protocol and implement it. Receive a byte to mcu from PC and echo it back to PC.Send a byte continuously from mcu to PC and display it on some io console (for example: HyperTerminal, Dock light ).Very first step you have to do is ensure serial communication is working fine. The disadvantage perhaps is that while Windows does support PPP it is buried within the dial-up networking and to be frank a pain to get working.
While this may be overkill if all you need to do is transfer files, it has the advantage of allowing you to use the the single serial port concurrently for other data streams and application protocols such as Telnet. You can then use any FTP client for the PC end, so again no PC software required. They are supported bu most terminal emulator tools such as TeraTerm Pro or PuTTY so no specific PC software need be written, just the microcontroller end.Ī more complex but flexible solution is to implement a TCP/IP stack and a PPP driver, and an FTP application layer - probabaly only practical if using a third-party TCP/IP stack and application layer. In the simplest case you would use a file transfer protocol such as XMODEM, YMODEM, ZMODEM or Kermit - these protocols were designed in the days before networking and the Internet were ubiquitous and deal with simple point-to-point transfers between two computers.
0 kommentar(er)
